TRDG503 Dual Cuff Operative Automatic Electronic Tourniquet
- Fully Automatic to perform double cuff procedure as well as IVRA Biers Block procedure.
- The cuff pressure is always maintained to set value automatically.
- The set value of cuff pressure can be altered to any other desired value even while it is in working mode.
- Independent channel operation for Proximal as well as Distal side Cuff.
- Parameter settings are independent of each other.
- Can be operated with one Dual/Double cuff OR two Single separate cuffs with different pressures.
- This Tourniquet can be programmed to suit your operation and post-operation needs by setting the parameters (DI) START DELAY and (ON) DURATION time.
- Both the parameters START DELAY and ON time can be changed during the operation before it's individual execution.
- Manual override for Cuff Deflation during programmed timing is also possible.
- Sophisticated ALARMS to give better warning messages.
- Independent ELAPSED TIME DISPLAY for both the channels.
- The last settings remain in the MEMORY when power is turned off.
- This Tourniquet is battery operated, hence PORTABLE, and can be used anytime, anywhere even for post-operation.
- Built in battery charging circuit to re-charge the battery immediately by just connecting the power cord.
- Colour coded cuffs and air tubing, specially designed. soft armored type cuffs to protect from accidental piercing by sharp tools.
- Coiled, expandable, puncture-resistant PU tubing with positive locking connectors PLC.
- The unit is compact, light-weight, very small in size.